Flow visualization of Rayleigh–Bénard convection for cubical cavity

Natural convective flow of air inside the cubical cavity is investigated numerically. The temperature of the bottom wall is kept higher than that of top cold wall, and other four walls are assumed to be adiabatic. Attention has been paid to the convective discretization schemes, like upwind, QUICK, total variation diminishing, normalized variable diagram (NVD) schemes that are compared with respect to accuracy. The output is validated with respect to the results available in the literature. A parallel computing message passing interface code is adapted to run the simulations. From the results, it is observed that the NVD scheme gives better results among all the employed convective discretization schemes irrespective of the mesh structure. Thus, in this article, self filtered central differencing which is a family of NVD, is used. From the enormous output data, along with the streamlines, contours of isotherms, the new technique of energy pathlines, and field synergy are used to visualize the fluid flow and heat transfer mechanism arising in the system in the range of Ra from 10³ to 10⁶. Free energy streamlines are observed with small Ra, whereas trapped energy streamlines are observed with high Ra. When Ra increases, synergy angle increases and implies that the synergy between the velocity vector and temperature gradient gets reduced and leads to increasing values of average Nusselt number (Nu).     

计及时间相关性的微能源网鲁棒规划方法

微能源网以能源的梯级利用为原则,可实现风、光等多种新能源的高比例消纳,满足区域内电、热、冷等多种能源需求。微能源网中存在新能源出力与冷、热、电负荷的多重不确定性。为增强系统规划结果的鲁棒性,常采用不确定集表述新能源出力与多种用能需求的不确定性,实现针对微能源网的鲁棒规划设计,往往使系统规划结果过于保守,降低系统经济性。为克服以上问题,规避实际运行中不可能发生的场景,降低系统规划结果的保守性,文章提出一种考虑时间相关性的微能源网鲁棒规划模型。该模型在计及多重源荷不确定性的基础上,进一步考虑新能源出力与冷、热、电负荷的时间相关性。通过算例对传统不确定集与所提出的改进不确定集进行对比分析,验证了所提模型及方法的优越性和有效性。     

Turbulent times: tourists’ attitudes towards wind turbines in the Southern Highlands in Iceland

As a response to the threat of climate change, many nations are increasing their use of renewable energy, including wind energy. Large wind farms often conflict with other land uses, particularly tourism, which is a growing industry worldwide. In Iceland, tourism has recently become the largest export sector, with majority of tourists travelling to the country to experience its nature. This paper examines tourists’ opinions and perceptions of wind power development in the Southern Highlands of Iceland and compares how number, size and proximity of wind turbines, and the landscape in which they are situated, influence tourists’ perceptions. The study is based on an on-site questionnaire survey conducted in 2015. The results indicate that one-third of the travellers would be less likely to visit the Southern Highlands if a proposed wind farm were built, and two-thirds think that wind turbines would decrease the area’s attractiveness.     

Structural optimization with an automatic mode identification method for tracking the local vibration mode

Traditional optimization methods, which take a specific order of modal frequency as the design constraint, could fail to obtain the desired solution because of modal substitution. An improved optimization model with continuous sizing variables is established to solve this problem, in which the minimum weight and a given local modal frequency are considered as the objective and the constraint. To capture accurately the expected mode of vibration, a local mode identification technique is proposed based on the strain energy ratio between the local area and the whole structure. With that scheme, an optimization system is developed, in which the local mode can be effectively identified and the constraint can be updated with it in the iteration process. Two numerical examples, of a reinforced plate and a satellite structure, are applied to illustrate the effectiveness and efficacy of the proposed method.     

阳泉矿区煤样不同应力状态下声发射特性分析

为探索原煤煤样的力学性能和不同应力状态下的声发射活动特性,对阳泉矿区新景矿、平舒矿主采煤层的煤样进行了单轴、三轴压缩和巴西劈裂的声发射试验,分析了2种煤样力学性能及不同加载过程的声发射活动规律。证明通过监测声发射(微震)活动分析煤样或煤岩体内部破坏状态是一种方便有效的手段。     

A spectrally selective surface structure for combined photothermic conversion and radiative sky cooling

The sun and outer space are the ultimate heat and cold sources for the earth, respectively. They have significant potential for renewable energy harvesting. In this paper, a spectrally selective surface structure that has a planar polydimethylsiloxane layer covering a solar absorber is conceptually proposed and optically designed for the combination of photothermic conversion (PT) and nighttime radiative sky cooling (RC). An optical simulation is conducted whose result shows that the designed surface structure (i.e., PT-RC surface structure) has a strong solar absorption coefficient of 0.92 and simultaneously emits as a mid-infrared spectral-selective emitter with an average emissivity of 0.84 within the atmospheric window. A thermal analysis prediction reveals that the designed PT-RC surface structure can be heated to 79.1°C higher than the ambient temperature in the daytime and passively cooled below the ambient temperature of approximately 10°C in the nighttime, indicating that the designed PT-RC surface structure has the potential for integrated PT conversion and nighttime RC utilization.     

CFD modeling of thermal contact resistance between solid contacting surfaces

Heat transfer has considerable applications in different industries such as designing of heat exchanger, nuclear reactor cooling, control system for spacecraft, and designing of microelectronics cooling. As the surfaces of two metals contact each other, this issue becomes so crucial. Thermal contact resistance (TCR) is one of the key physical parameters in heat transfer of mentioned surfaces. Measuring the experimental value of TCR in laboratory is highly expensive and difficult. As an alternative, numerical modeling methods could be engaged. In this study, inverse problem method solution is utilized as a proper method for estimation of TCR value. In this order, three different configurations (flat-flat, flat-cylinder, and cylinder-cylinder) were utilized in two steady and unsteady state conditions to predict the value of TCR. A comparison between the measured values and obtained values from the simulation show the errors for flat-flat, flat-cylinder, and cylinder-cylinder configuration after 10 min from starting the experiment are 4.6074%, 0.1662%, and 0.5622%, respectively. And in steady-state condition, the corresponding errors are 6.06e-3%, 1.506%, and 0.846%, respectively. In conclusion, the final results establish the fact that the inverse problem method solution can predict TCR values between contacting surfaces.     

Developing microencapsulated 12‐hydroxystearic acid (HSA) for phase change material use

Phase change materials (PCM) have an increasingly more important role as a thermal energy storage (TES) media. However, leakage problem of PCM causes limitation during their integration in TES systems. Therefore, the encapsulation of PCMs is attracting research interest to extend usage of PCMs in real TES applications in recent years. In this study, hydroxystearic acid (HSA) was encapsulated with polymethyl methacrylate (PMMA) and different PMMA comonomer shells via emulsion polymerization method for the first time in literature. HSA with high melting temperature range (74–78°C) can widen the scope of using PCMs, and the encapsulated form can make it more versatile. The chemical structures, morphologies, and thermophysical properties of capsules were determined by FT‐IR, SEM, DSC, TGA, and thermal infrared camera. Among the produced HSA capsule candidates, PMMA‐HEMA is the most promising with latent heat of 48.5 J/g with melting range of 47 to 85°C. SEM analysis indicated that the capsules have spherical shape with compact surface at nano‐micro (100–440 nm) size range; however, some capsules exhibited agglomeration.     

Outcome‐based ventilation: A framework for assessing performance,health, and energy impacts to inform office building ventilation decisions

This article presents an outcome‐based ventilation (OBV) framework, which combines competing ventilation impacts into a monetized loss function ($/occ/h) used to inform ventilation rate decisions. The OBV framework, developed for U.S. offices, considers six outcomes of increasing ventilation: profitable outcomes realized from improvements in occupant work performance and sick leave absenteeism; health outcomes from occupant exposure to outdoor fine particles and ozone; and energy outcomes from electricity and natural gas usage. We used the literature to set low, medium, and high reference values for OBV loss function parameters, and evaluated the framework and outcome‐based ventilation rates using a simulated U.S. office stock dataset and a case study in New York City. With parameters for all outcomes set at medium values derived from literature‐based central estimates, higher ventilation rates’ profitable benefits dominated negative health and energy impacts, and the OBV framework suggested ventilation should be ≥45 L/s/occ, much higher than the baseline ~8.5 L/s/occ rate prescribed by ASHRAE 62.1. Only when combining very low parameter estimates for profitable impacts with very high ones for health and energy impacts were all outcomes on the same order. Even then, however, outcome‐based ventilation rates were often twice the baseline rate or more.